584,833 active members*
5,614 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > Question about Fadal
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2005
    Posts
    76

    Question about Fadal

    Is the control a PC base system? And is DOS the operating system?
    Can the operating system be accessed at the machine control panel and crt?

  2. #2
    Join Date
    Jan 2004
    Posts
    3154
    You should probably be directing this question directly to Fadal.
    We pretty much need to know year, model and control type to answer this as well.
    www.integratedmechanical.ca

  3. #3
    Join Date
    Mar 2003
    Posts
    900
    The Fadal Legacy Contro(88HS) is not a PC based control and does not run on DOS or Windows. The operating system is hardcoded in eproms and is not accessible to the end user.

    Neal

Similar Threads

  1. Extremely basic machining question.
    By touser in forum MetalWork Discussion
    Replies: 9
    Last Post: 06-19-2005, 06:51 AM
  2. Making a list of Fadal 104d problems
    By XYZ machine in forum Fadal
    Replies: 13
    Last Post: 04-04-2005, 10:34 PM
  3. Fadal 3d Digitizing
    By WORKALONE in forum Fadal
    Replies: 5
    Last Post: 05-05-2004, 12:39 AM
  4. MP32 fadal controller problem
    By nervis1 in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 02-01-2004, 08:27 PM
  5. Searching Backwards
    By jonbanquer in forum Fadal
    Replies: 11
    Last Post: 07-29-2003, 12:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •