510,134 active members
3,011 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > SprutCAM > Surfcam Integrated in Solidworks.
Results 1 to 2 of 2
  1. #1

    Surfcam Integrated in Solidworks.

    I'm really starting to wish that Surfcam was integrated directly into Solidworks. I'm interested to see if others agree.

    Lets say you could have virtually all of the functionality you have now but you'd have to basically learn a new interface. What do you think?

    I realize this would be a major undertaking for Surfware and I'm not suggesting that they should "just" do it as if it's no big deal.

    I think Surfcam has by far the best technology as far as tool path generation. Now that we've got Truemill, it's hard to ask for much more on the technical side. What I do want is a new modern user interface and I figure it makes the most sense to integrate it directly into Solidworks like some of the other CAM makers do.

  2. #2
    Gold Member
    Join Date
    Jun 2006
    Posts
    3013
    You will probably get a better response if you post this in the Surfcam forum - this is the SprutCAM forum.

Similar Threads

  1. Integrated CAM Advantages?
    By NexGenMfg in forum Uncategorised CAM Discussion
    Replies: 33
    Last Post: 07-19-2008, 03:28 PM
  2. Meshcam - stand alone vs CAD integrated
    By harryn in forum GRZ Software- MeshCAM
    Replies: 3
    Last Post: 11-03-2007, 01:08 AM
  3. integrated stepper/driver
    By J Solinger in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 10-09-2006, 03:08 PM
  4. USB Controllers & Integrated Stepper Motors
    By tt_raptor_90 in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 01-29-2006, 11:59 PM
  5. Integrated motor/drive/controller
    By NEATman in forum Community Club House
    Replies: 0
    Last Post: 03-16-2004, 08:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •