584,814 active members*
5,284 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > interchange BMUs boards on Fanuc 6M
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2008
    Posts
    10

    interchange BMUs boards on Fanuc 6M

    hi there
    Currently I'm using BMU 64-2 A87L-0001-0016 05E and would like to get spare boards in case my current board goes off. Its hard to get the same coded board but i found others selling different BMUs listed below. Would it be possible to interchange/replace those BMUs to the Fanuc 6M motherboard ?

    BMU 256-4 A87L-0001-0018 08G
    BMU 1M-1 A87L-0001-0084 05B
    BMU 256-1 A87L-0001-0017 05I

    Thanks in advance

  2. #2
    Join Date
    Nov 2006
    Posts
    175
    These are just bigger, but the same old bubble memory. Check also prices for CMOS replacements, should be more reliable - there are Fanuc made, but also third parties, I remember memex.ca

Similar Threads

  1. Wanted Fanuc Servo Motors and boards
    By CNCMAN 83 in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 07-07-2010, 06:05 PM
  2. Software to backup and interchange programs between different controls.
    By steelhead9 in forum DNC Problems and Solutions
    Replies: 2
    Last Post: 03-04-2009, 02:02 PM
  3. Interchange Chart for LM components
    By IQChallenged in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 11-30-2006, 08:22 PM
  4. Fanuc Circuit Boards ( PCB's )
    By mld in forum Fanuc
    Replies: 0
    Last Post: 11-14-2006, 04:52 AM
  5. Fanuc boards
    By Hlynur in forum Fanuc
    Replies: 4
    Last Post: 09-19-2006, 03:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •