I have an encoder with A+ and A- and also a B+ and B-.
So I have 4 wires that I need to connect to the 2 encoder terminals on the G320. Should I wire both A+ and A- onto the same A terminals?
Cheers
Gav
I have an encoder with A+ and A- and also a B+ and B-.
So I have 4 wires that I need to connect to the 2 encoder terminals on the G320. Should I wire both A+ and A- onto the same A terminals?
Cheers
Gav
ignore the A- and B- as they are the inverted signals of A and B respectively. Also, verify the current draw on your encoder. I must be 50ma or less to be powered from the Gecko, If it is more, you will need to provide a separate power supply and follow the instructions which can be found on their web site.
Art
AKA Country Bubba (Older Than Dirt)
What need to take attention to get encoder compatible with gecko 320. I have a plan to buy hanyoung (korean made), it is rotary encoder, how do I know that this encoder work with g320?