584,805 active members*
4,748 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2006
    Posts
    4

    Japax LS500 rs232 help

    Hi everyone, I`m trying to load programs from a computer to an old japax (1986 or 1987 I guess) using the rs232 25 pins port.
    I spent 2 days trying with no success, I really dont know if there is a trick I`m missing or something is wrong or damaged in the machine; and the manual I got with the machine dont mention any word about it.
    The port in the computer is configured according to a sticker on one chip inside. I have a cable that is used for lathes and mills with no problems.

    Is anyone loading programs this way?
    Some hints could help me a lot, cable and/or control configuration, any special secuence, etc.

    Thanks and regards.

  2. #2
    Join Date
    Nov 2018
    Posts
    3
    Goodnight.
    I have a problem with the RS-232 of an EDM Japax LU3B FE02, it marks me on the "error tape Reader" screen and does not pass the program I send. Only on two occasions did I frame ISO error No. 004
    but since then I can not load any program, help please.

Similar Threads

  1. Bridgeport Japax
    By Fairlane6t9 in forum EDM Discussion General Topics
    Replies: 10
    Last Post: 03-17-2009, 06:00 PM
  2. Floppy start for Japax Wire EDM
    By hien100881 in forum CNC Wire Foam Cutter Machines
    Replies: 1
    Last Post: 10-11-2008, 03:42 AM
  3. Hurco KM1 RS232 to USB OR RS232 to PCMCIA solution?
    By modernprecision in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 09-11-2008, 07:15 PM
  4. RS232 Help
    By Jerrytool in forum Daewoo/Doosan
    Replies: 9
    Last Post: 03-15-2007, 11:51 PM
  5. Japax wire edm price
    By TR MFG in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 11-17-2005, 03:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •