Hi, I need a drawing of one tooth for a 35 tooth sprocket to suit a 428 roller chain.
I have the specifications from the Machinery Hand Book but will need to do some trig if drawing not available. Thanks.
Hi, I need a drawing of one tooth for a 35 tooth sprocket to suit a 428 roller chain.
I have the specifications from the Machinery Hand Book but will need to do some trig if drawing not available. Thanks.
Thanks Karl
That's much simpler than what the specifications call for, but I'm sure that's all I really need.
Cheers.
Gene, Thanks for the site link, that makes things a lot easier. Cheers.