[Taehk]

anyone has same model?

my technician believes that this machine uses different code for Z-axis legth off set than G43 and G44.

if it is different, anyone know what that is?

[Superman]

Hi Taehk,

All Okuma's use G56 to take up the length offset
Fanuc's use G43

usage example
each offset # has 2 parts
H= length, can be from gauge point, or from referencing tool
D=tool radius which depends on programming.

G0 A--B---C---
G0 X--- Y---
S1000 M3
G56 H11 Z1.0   ( forces rapid to Z1.0 using value stored in tool offset H11 )
M8
...

[Taehk]

Thank you sooo much!!!

Because of your help, I can finally run my business!