585,762 active members*
4,198 visitors online*
Register for free
Login

Thread: Fanuc S6T - Nakamura TMC 4 -80

Results 1 to 8 of 8
  1. 06-30-2009, 09:38 AM #1
    Jonne
    Jonne is offline Registered
    Join Date
    Feb 2007
    Posts
    171

    Fanuc S6T - Nakamura TMC 4 -80

    Hello!

    I need schematics for Nakamura TMC 4 lathe. This machine is old 6T version. I have some schematics but not all. Example servodrives and spindle encoder schematics are missing.

    Also if anyone have some datasheet about spindle unit, I would be very grateful.
    That spindle unit is little strange, it fits lathes and machining centers. Also there is speed control via +10V analog and 12-bit dataline.


    Regards,
    Jonne
    Reply With Quote Reply With Quote
  2. 06-30-2009, 06:09 PM #2
    yours_prabhat
    yours_prabhat is offline Banned
    Send a message via MSN to yours_prabhat Send a message via Yahoo to yours_prabhat
    Join Date
    Dec 2008
    Posts
    239
    Quote Originally Posted by Jonne View Post
    Hello!

    I need schematics for Nakamura TMC 4 lathe. This machine is old 6T version. I have some schematics but not all. Example servodrives and spindle encoder schematics are missing.

    Also if anyone have some datasheet about spindle unit, I would be very grateful.
    That spindle unit is little strange, it fits lathes and machining centers. Also there is speed control via +10V analog and 12-bit dataline.


    Regards,
    Jonne
    i can help you mail me on [email protected], or call me on +91-9430737981 i am having the manual of all controls.
    Regards
    Prabhat Mishra
    Reply With Quote Reply With Quote
  3. 06-30-2009, 08:41 PM #3
    guhl
    guhl is offline Member
    Join Date
    Aug 2007
    Posts
    793
    Quote Originally Posted by Jonne View Post
    Hello!

    I need schematics for Nakamura TMC 4 lathe. This machine is old 6T version. I have some schematics but not all. Example servodrives and spindle encoder schematics are missing.

    Also if anyone have some datasheet about spindle unit, I would be very grateful.
    That spindle unit is little strange, it fits lathes and machining centers. Also there is speed control via +10V analog and 12-bit dataline.


    Regards,
    Jonne
    10V and 12-bit dataline on spindle? If so, 10V is for speed setting, and 12 bits are, most likely, for position setting.
    Reply With Quote Reply With Quote
  4. 07-01-2009, 07:01 AM #4
    Jonne
    Jonne is offline Registered
    Join Date
    Feb 2007
    Posts
    171
    10V and 12-bit dataline on spindle? If so, 10V is for speed setting, and 12 bits are, most likely, for position setting.
    Schematic says that is "speed command bits". There is four positioning input seperataly.
    Reply With Quote Reply With Quote
  5. 07-01-2009, 07:09 AM #5
    yours_prabhat
    yours_prabhat is offline Banned
    Send a message via MSN to yours_prabhat Send a message via Yahoo to yours_prabhat
    Join Date
    Dec 2008
    Posts
    239

    for your help

    please mail me on [email protected] the details about machine control and probelem I am sure help you regards = prabhat mishra +91-9430737981/or you can mail also on [email protected]
    Reply With Quote Reply With Quote
  6. 07-01-2009, 07:36 AM #6
    guhl
    guhl is offline Member
    Join Date
    Aug 2007
    Posts
    793
    Quote Originally Posted by Jonne View Post
    Schematic says that is "speed command bits". There is four positioning input seperataly.
    Which is model of the spindle unit? A06B-xxxx-xxxx
    Reply With Quote Reply With Quote
  7. 07-01-2009, 08:14 AM #7
    Jonne
    Jonne is offline Registered
    Join Date
    Feb 2007
    Posts
    171
    please mail me on [email protected] the details about machine control and probelem I am sure help you regards = prabhat mishra +91-9430737981/or you can mail also on [email protected]

    I send e-mail to you some hour ago...
    Reply With Quote Reply With Quote
  8. 07-01-2009, 07:20 PM #8
    Jonne
    Jonne is offline Registered
    Join Date
    Feb 2007
    Posts
    171
    Which is model of the spindle unit? A06B-xxxx-xxxx
    Spindle unit:
    A20B-0008-037 /02

    Servo drives:
    A06B-6045-H0005
    A06B-6045-H0006
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. PROBLEM IN FANUC 18T-A NAKAMURA 20 II
    By Dragonbikes in forum Fanuc
    Replies: 6
    Last Post: 03-28-2019, 07:07 AM
  2. Nakamura-Tome TMC-2 Fanuc 3T
    By Leblondmakino in forum Fanuc
    Replies: 17
    Last Post: 06-10-2012, 06:29 PM
  3. Fanuc 6T - Nakamura Tome TMC-3
    By mcoulson in forum Fanuc
    Replies: 5
    Last Post: 12-02-2009, 07:06 PM
  4. Fanuc 18T-A Parameters-Nakamura T.C.
    By JerryH in forum Fanuc
    Replies: 2
    Last Post: 07-02-2008, 12:42 PM
  5. FANUC-6T for NAKAMURA TMC-4
    By essafiwalid in forum Fanuc
    Replies: 1
    Last Post: 01-08-2008, 04:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules