[inkydo69]

Do I need a H nest to the G43 so it know what Tool offset we are in use?
Here is what I get when I post..

O0001(D-63636)
(DATE - 07-01-09)
(TIME - 12:11 PM)
( T5 | 1/2 2FLT SCEM | H5 | XY STOCK TO LEAVE - .3 | Z STOCK TO LEAVE - 0. )
( T14 | 1/2 BALL CUTTER | H14 )
G20
G0 G17 G40 G49 G61.1 G80 G90
( ROUGH OUT .300 LEFT ON FACE )
T5 M6
G0 G90 X-.4121 Y3.86 S12000 M3
G43 Z3.5 T14
G1 Z2.75 F100.
X25.2771 F200.
Z2.558
X-.4121
Y4.5308 Z1.5158
X-.4121
Y4.6665 Z1.38
X25.2771
G0 Z3.5
M5
G91 G28 Z0.
M01
( FINISH FACE )
T14 M6
G0 G90 X-.4121 Y3.56 S12000 M3
G43 Z3.5 T5
G1 Z2.5 F100.
X25.2771 F200.
Z2.4508
Y4.3812 Z1.0946
X-.4121
G0 Z3.5
M5
G91 G28 Z0.
G28 X0. Y0.
M30
%

[psychomill]

It depends on your machine parameter settings and what style of offsetting you're using (Offset page or Tool Data page).

[inkydo69]

It depends on your machine parameter settings and what style of offsetting you're using (Offset page or Tool Data page).

Yes But does it use a "H15" After G43 or does it know from the tool it self?

[arie2003]

hello,

as psycomill said, it's depend on your parameter setting. You can check it at User Parameter --> F parameter (EIA/ISO). F93 if I'm not wrong.
if you use tool offset, you need to put H there.
If you use tool length of tool data, you no need to put H there. It will follow tool data value.
Please read operation manual book, Setting tool data for EIA/ISO section for detail explanation.

[inkydo69]

Thanks I will take a look.

Inky

Will it hurt to have the H12 for a T12 ?

[inkydo69]

Ok now i got it thanks to everyones help.

Full eia no mazatrol at all THANKS

Inky