585,974 active members*
4,307 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Xylotex > Breakoutbords optoisolated
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2004
    Posts
    20

    Breakoutbords optoisolated

    Hi all..

    Do i need an extra breakout bord for xylotex or is it okey to connect limit switches and home sw. directly to xyllotex?

    /Rikard

  2. #2
    Join Date
    Mar 2003
    Posts
    35538
    Some people will tell you to get a breakout board, but I think most people just hook everything up directly to the Xylotex.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •