I have wiring schematic and have hard time interpet how to translate into simple wiring for E-Stop and Safety Door Guard.
My equipment will not without the two safety switches in place.
Anyone please can help me on this subject I would be appreciate. I prefer you send me a PM and we can talk about it offline.
Thanks
Results 1 to 2 of 2
-
07-19-2009, 05:03 PM #1
Registered
- Join Date
- Jul 2008
- Posts
- 68
Need help on wiring E-Stop and Door Guard
-
07-19-2009, 05:28 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
The box is obviously a temporary solution that satisfies all the inputs etc while testing, I assume you are wanting to replace this or the ones that do not exist at present, is any of the E-stops wired and you just need the door switches hooked Up?
They all appear to go into the 20 pin Honda connector.
PM sent.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
E-Stop wiring
By Micky15044 in forum CNC Machine Related ElectronicsReplies: 2Last Post: 08-05-2008, 11:13 AM -
Gas struts forces for Emco guard door.
By Adee in forum Benchtop MachinesReplies: 0Last Post: 10-04-2007, 11:51 AM -
E-stop Wiring
By bill south in forum Safety ZoneReplies: 12Last Post: 12-05-2006, 11:04 AM -
E-Stop Wiring?
By bigz1 in forum CNC Machine Related ElectronicsReplies: 3Last Post: 11-01-2006, 12:41 AM -
E-stop wiring
By SPEEDRE in forum CNC Machine Related ElectronicsReplies: 7Last Post: 08-31-2005, 09:29 PM
Posting Permissions
