584,826 active members*
5,275 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2009
    Posts
    8

    Mazak QT 20 loss parameter

    Can you help me? now Iam having a cnc turning machine,it lathe Mazaktrol quickturn 20, it's loss parameter
    Good Luck!
    Phuong Lam.

  2. #2
    Join Date
    Jul 2008
    Posts
    9
    Hi maybe you can ask the manufacturer for the parameters of yor machine.
    most of the time the will keep a copy of the parameter of ever machine the had sold.
    at least the did in my case at audit cnc and the were so kindly to send them by email.

    or try to finda seem machine and download the parameter files from this machine and up load them into the one that has lost them.

    I always keep copy of my parameters on my computer and a copy on a cdrom which i have put into the electrical cabinet of the machine. to be sure not to lose them when i have a battery failure or have to change batteries.

  3. #3
    Join Date
    Jul 2009
    Posts
    8
    Dear Jeroen aalders.
    Can you send to me ( email : [email protected]).
    Thank very much.
    Phuong lam.

Similar Threads

  1. Mazak VQC 20/40B Zero Return Parameter
    By nlh in forum Mazak, Mitsubishi, Mazatrol
    Replies: 7
    Last Post: 07-19-2017, 10:41 PM
  2. Feeler DT0 with Mitsubishi Meldas M50 parameter loss.
    By dpelivan in forum DNC Problems and Solutions
    Replies: 8
    Last Post: 01-10-2012, 10:48 PM
  3. Mazak EIA enable parameter
    By Bakes1 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 2
    Last Post: 01-12-2008, 08:17 PM
  4. Mazak M plus parameter?
    By MrUZU1 in forum MetalWork Discussion
    Replies: 4
    Last Post: 06-09-2007, 02:50 AM
  5. Mazak OP2 parameter
    By xr135 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 05-17-2006, 08:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •