There will be a free webinar on Post-Processors
Post Processor Webinar - limited to the first 200 registrants.
Thursday, July 30, 2009 2:00 PM - 3:30 PM EDT
This will cover post-processor creation and modification. This is an advanced Webinar and It is recommended that you first familiarize yourself with the BobCAD-CAM System prior to attempting to create or modify your post-processor.
The webinar will cover
1. Post Editor
2. Post Files
3. Post Variables
4. Q & A
Link To register...
https://student.gototraining.com/reg...99341746841879
You can also view previously recorded webinars at http://www.bobcadsupport.com