584,802 active members*
5,037 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Feb 2005
    Posts
    7

    25 pin connector

    I'm looking for a 25 pin connector as seen in this image.

    http://www.taomc.com/bits2bots/25pin_cu.JPG

    All that I come up with in a search is standard printer connectors. I can't find one like this though. Is this something that I have to make using a printer connector and ide cable?

  2. #2
    Join Date
    Dec 2003
    Posts
    24216
    That looks like a standard AMP IDC to D socket connector , e.g. amp 747306-2 the other is a standard ribbon idc header 26pin
    Al
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  3. #3
    Join Date
    Aug 2004
    Posts
    2849
    Go to http://www.mouser.com look for DB25 to Dual In line cables (26 pin or dual 13 position). Yes, you can also make it yourself...DB25 IDC, 0.050 spacing flat cable, and an 26 position IDC connector.

  4. #4
    Join Date
    Feb 2005
    Posts
    29

    db25 d connector

    Googles earch for 'db25 d connector' turned up this as first hit also.
    http://www.talkaboutelectronicequipm...es/146130.html
    FWIW
    DaveP

  5. #5
    Join Date
    Dec 2003
    Posts
    24216
    Except that refers to a wired 25pin D as compared to the ribbon version in the first post.
    Al
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

Similar Threads

  1. Staggering motors
    By viktorcnc in forum Stepper Motors / Drives
    Replies: 14
    Last Post: 10-25-2015, 08:11 PM
  2. Sourcing Hardware (1/8 Pin with threads)
    By Swami in forum MetalWork Discussion
    Replies: 4
    Last Post: 03-26-2005, 05:35 PM
  3. Help find terminal connector type for this stepper
    By Konstantin in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 10-09-2004, 07:34 PM
  4. DB25I/O and software
    By pminmo in forum CNC Machine Related Electronics
    Replies: 4
    Last Post: 08-13-2004, 02:27 PM
  5. Pc Rs232 > Fanic 10te-f
    By abselect in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 07-06-2004, 03:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •