OK, those of you with a Shuttle Pro please test this plug in.
I added 10 total custom macros, and I added a "Reverse Axis" option for Axis X-C.
Let me know how the Reverse axis works, since there is another section of code that deals with jogging, but I think it is for something different, could be wrong of course.
Remember to save out your current shuttle pro .dll
Ok, I have attached, the debugged version II of the shuttle pro pendant for you if you wish to upgrade. It has be tested by the mach support community and all is working as it should.
Total of 10 Custom Macro's now
Added Independant Axis reversals for all 6 axis.
Note: since I had to follow Arts numbering convention, the 6 extra macros are at the end of the 800 series list, this will bump down all OEM code indexes by 6, so any buttons you have assigned to OEM codes you will need to Re-assign.
To install:
you will need to open the zip file to your desktop and then if your
running the standard Tormach install directory, navigate to it, and copy and paste the, "ShuttlePro.dll", into your plugins directory.
DON'T double click the, "ShuttlePro.m3p", shuttle pro unless your running standard mach3 in its usual directory, if that is the case then double click the shuttlepro.m3p and it will auto install into the standard mach3 directory.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.