[SASMAN]

Hi everyone,
I have just managed to aquire an Emco Compact 6 with Emcoturn T1 control. It is a very old machine I know, and it has sat around for a long time doing nothing. I believe, after reading various articles on the internet, that it may need the MSD reinstalled, problem is I dont even have a manual for it, let alone knowledge on programming it. Can anyone help me out? Forgive me if I have posted in the wrong section, prehaps a moderater could move this thread to the correct section, if it is indeed in the wrong area.
Thank you in advance for any information .

[cnc_swe]

We have our own tree Now there are 2 pieces of trees in
Metalworking Machines

under headings EMCO EMCO Lathe and Mill.
http://www.cnczone.com/forums/forumdisplay.php?f=444

[wahab_002]

Hi, I m new to this blog.
I have an Emcoturn 120 with T1 controller. I have the MSD tape but it seems to be washed away as i cod find nothing on it.
I dun have the operating or programming manual. So i m blank abt the machine. Can you plz plz help me get the manuals or can anyone atleast tell me how to use it through RS-232 cable, baud rate ? or if u can just tell me the sequence of editting and storing the program.
I will be more than grateful to you.