523,887 active members*
2,595 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Daewoo Puma 4- anyone have manuals or experience with them?
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Feb 2007
    Posts
    12

    Daewoo Puma 4- anyone have manuals or experience with them?

    Just picked up a Puma 4 lathe. I think it was build in 1991. Unfortunately it came out of a storage facility and didnt have any of the manuals with it. I powered it up and everything seems to work good except for the turret. Its stuck unclamped and when I try to do a toolchange I dont get any response. I'm going to start pulling it apart to see if something is stuck mechanically first. The machine is pretty dirty so I wouldnt be suprised if the turret just needs a good cleaning.

    I was wondering if anyone has a wiring schematic for this machine and/or an exploded view of the turret. That would make diagnosing this alittle easier.

    Also, if anyone has run one of these or worked on one in the past, what problems with the turrets did you have?

    Thanks
    chop

  2. #2
    Not sure the electrics will be relevant to your machine. but they are probably very similar.
    Attached Files Attached Files

  3. #3
    Registered
    Join Date
    Feb 2007
    Posts
    12
    Thanks, that should help me quite a bit.

Similar Threads

  1. Looking for DAEWOO PUMA 10S-2T Manual
    By zephyr in forum Daewoo/Doosan
    Replies: 3
    Last Post: 04-11-2016, 01:11 PM
  2. Daewoo Puma 6 with 3tf
    By mmxmb in forum Daewoo/Doosan
    Replies: 1
    Last Post: 04-06-2011, 01:36 PM
  3. Daewoo puma 8s
    By mroy0404 in forum Daewoo/Doosan
    Replies: 3
    Last Post: 06-14-2010, 07:58 AM
  4. I Need to buy a Daewoo Puma 8
    By gcrudgington in forum Daewoo/Doosan
    Replies: 2
    Last Post: 10-20-2008, 11:24 PM
  5. Daewoo Puma 200
    By williamsxu in forum Daewoo/Doosan
    Replies: 10
    Last Post: 01-17-2007, 11:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •