584,833 active members*
5,419 visitors online*
Register for free
Login
Results 1 to 17 of 17
  1. #1
    Join Date
    Mar 2003
    Posts
    779

    Over 900 users!!

    Now we wait for 1000!! I hope everyone got in the dates that they wanted.

    (group)
    Thanks

    Jeff Davis (HomeCNC)
    http://www.homecnc.info


    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  2. #2
    Join Date
    Mar 2003
    Posts
    507

    Talking

    Mine is coming up soon.....:cheers:

    Klox
    *** KloX ***
    I'm lazy, I'm only "sparking" when the EDM is running....

  3. #3
    Join Date
    May 2003
    Posts
    26

    Re: Over 900 users!!

    Originally posted by HomeCNC
    Now we wait for 1000!! I hope everyone got in the dates that they wanted.

    (group)
    Jeff,
    I think it's an awesome thing you're doing here!!
    :cheers:
    Please Note: No trees were destroyed in the sending of this
    contaminant free message.
    We do concede, a signicant number of electrons may have been
    severely inconvenienced!

  4. #4
    Join Date
    Mar 2003
    Posts
    6855

    Re: Re: Over 900 users!!

    Originally posted by TRC1
    Jeff,
    I think it's an awesome thing you're doing here!!
    :cheers:
    I own the site, Paul/ cncadmin. :banana:

  5. #5
    Join Date
    May 2003
    Posts
    26

    Re: Re: Over 900 users!!

    Sorry about that Paul! I was talking about the servos he donated for the contest. You have a really good thing going on. Your forum is unbelieveable. I must have read almost every post on the boards. I have only been here a couple of months now and I can honestly say I have never seen a board run so smoothly! You have a great bunch of people here! You deserve an attaboy!
    :cheers:


    Don
    Please Note: No trees were destroyed in the sending of this
    contaminant free message.
    We do concede, a signicant number of electrons may have been
    severely inconvenienced!

  6. #6
    Join Date
    Mar 2003
    Posts
    779
    Thanks Don (TRC)

    I was in the giving mood and I thought that it might help someone get into servo control.
    Thanks

    Jeff Davis (HomeCNC)
    http://www.homecnc.info


    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  7. #7
    Join Date
    Mar 2003
    Posts
    6855

    Re: Re: Re: Over 900 users!!

    Originally posted by TRC1
    Sorry about that Paul! I was talking about the servos he donated for the contest. You have a really good thing going on. Your forum is unbelieveable. I must have read almost every post on the boards. I have only been here a couple of months now and I can honestly say I have never seen a board run so smoothly! You have a great bunch of people here! You deserve an attaboy!
    :cheers:


    Don
    I kinda trhought that's what you meant, Jeff has really helped this site, the dude knows what he is talking about. He is the CNC Guru of CNCzone, along with a bunch others here as well. I wish I could win the servos myself .

  8. #8
    Join Date
    Mar 2003
    Posts
    201
    This site keeps getting better and better. I am addicted to this site because I love to learn.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  9. #9
    WallCrawler Guest
    Originally posted by JIMMY
    This site keeps getting better and better. I am addicted to this site because I love to learn.
    And your avitar shows it LOL

  10. #10
    Join Date
    Mar 2003
    Posts
    499
    Hey Wallcrawler jimmy's hair always looks like that.
    I know we are former co-workers and 5:00am just
    doe'st agree w/ his DOO?

    PEACE

  11. #11
    Join Date
    Mar 2003
    Posts
    507
    Jimmy it sounds that we are birds of the same (feather) hair, that why i use the No 1 on my Wahl. I don't have the need for a comb any more!!!!! LOL

    Klox
    *** KloX ***
    I'm lazy, I'm only "sparking" when the EDM is running....

  12. #12
    Join Date
    Mar 2003
    Posts
    779
    973 users now. We are going faster than I though. Did someone place a link on a real popular site??
    Thanks

    Jeff Davis (HomeCNC)
    http://www.homecnc.info


    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  13. #13
    Join Date
    Mar 2003
    Posts
    6855
    Yes google.com

  14. #14
    WallCrawler Guest

    Members: 980

    Members: 980

  15. #15
    Join Date
    Mar 2003
    Posts
    779
    1001 members now. I have just boxed up three new servo motors and am now waiting to see who gets them.
    Thanks

    Jeff Davis (HomeCNC)
    http://www.homecnc.info


    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  16. #16
    WallCrawler Guest

    I will let you know by 10 pm EST

    Originally posted by HomeCNC
    1001 members now. I have just boxed up three new servo motors and am now waiting to see who gets them.

    I have 1 responce, from 1, waiting untill 10 pm today for the other. Emails and PM have been sent out..

  17. #17
    Join Date
    Mar 2003
    Posts
    779
    Alright JIMMY!!! Send me your address in a PM !!!

    Jeff
    Thanks

    Jeff Davis (HomeCNC)
    http://www.homecnc.info


    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. Alibre Users Honest Opinions
    By xyzcnc in forum Uncategorised CAD Discussion
    Replies: 99
    Last Post: 02-17-2010, 02:37 PM
  2. Inventor users?
    By wjbzone in forum Autodesk
    Replies: 43
    Last Post: 10-12-2006, 07:28 PM
  3. How many users?
    By S4 Monster in forum SprutCAM
    Replies: 9
    Last Post: 11-25-2005, 02:06 AM
  4. V17 users???
    By turmite in forum BobCad-Cam
    Replies: 15
    Last Post: 07-27-2005, 06:24 PM
  5. Are there Camsoftcorp users out there?
    By HuFlungDung in forum CamSoft Products
    Replies: 40
    Last Post: 11-13-2003, 10:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •