I have fumbled thru MC 9.1 enough to send a simple program to the mill. It didn't like the code; wasn't happy with the WCS and a couple of G codes. The machine is a Light Machines TMC 1000. I tried running it straight from MC 9 and then loaded the code in the TMC program and tried that. I loaded the Post Processors from the MC9 CD but have know idea which to use. The manual I have for the mill says it recognizes RS 247 G and M codes. The properties of the TMC program say TMC.PIF? Do I contact MC or Light Machines?
Any help would be appreciated.
Mike
Thread: Post Processor
Results 1 to 3 of 3
-
08-02-2009, 02:47 AM #1
Registered
- Join Date
- Mar 2008
- Posts
- 25
Post Processor
-
08-02-2009, 05:26 PM #2
Registered
- Join Date
- Sep 2004
- Posts
- 145
Try here:
http://www.emastercam.com/posts/edu_v9.php
They list a light machines post
MarkInsanity "doing the same thing and expecting a different result"
Mark
www.mcoates.com
-
08-02-2009, 07:56 PM #3
Registered
- Join Date
- Mar 2008
- Posts
- 25
Thanks, I will try that. You have been very helpful.
Thanks again.
Mike
Reply With QuoteSimilar Threads
-
What's a post processor and do I need one?
By jimluu in forum DIY CNC Router Table MachinesReplies: 1Last Post: 04-26-2008, 08:28 PM
Posting Permissions
