Please help
I bought in the U.S. TOYODA GT52 CNC lathe. During the transport to Europe disable batteries. I do not know the parameters. Maybe someone has the parameters for this or a similar machine.
Our machine is:
Type: Ernault-Toyoda GT52
GN Fanuc Series 10
SN 52032
Leszek Seroczynski
POLAND
[email protected]
Thread: Toyoda backup Fanuc 10
Results 1 to 3 of 3
-
08-02-2009, 11:27 AM #1
Registered
- Join Date
- Aug 2009
- Posts
- 3
Toyoda backup Fanuc 10
-
08-02-2009, 11:56 AM #2
Registered
- Join Date
- Mar 2008
- Posts
- 7
Contact Toyoda USA
Contact the folks at Toyoda USA and give them your machine model and serial number. Many of the machine tool builders keep records of machine parameters, keep relays, options installed and so on.
http://www.toyodausa.com/contactus.shtml
Once you get the required information you may want to perform this procedure:
http://www.kfasllc.com/memory_backup_restore_F1011.htm
-
08-02-2009, 12:03 PM #3
Registered
- Join Date
- Aug 2009
- Posts
- 3
Thank you
Contact with the Toyoda Machinety USA - unfortunately do not have a backup. I recommend searching individual
szukaj
Reply With QuoteSimilar Threads
-
Parameter Settings for Toyoda Lathe (FANUC 11T)
By obieron in forum CNC Machining CentersReplies: 7Last Post: 02-05-2009, 04:23 PM -
Dead Fanuc / Toyoda
By bluedemon in forum DNC Problems and SolutionsReplies: 14Last Post: 01-26-2009, 05:28 PM -
Fanuc 16i and Toyoda
By RAC in forum FanucReplies: 1Last Post: 10-27-2006, 01:28 AM -
Fanuc 16i and Toyoda
By RAC in forum CNC (Mill / Lathe) Control Software (NC)Replies: 3Last Post: 10-19-2006, 01:48 AM -
Fanuc / Toyoda FA630
By ajl6549 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 08-17-2006, 02:44 AM
Posting Permissions
