584,808 active members*
5,451 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > OKK > Got a problem with OKK MCV 520.
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2014
    Posts
    1

    Got a problem with OKK MCV 520.

    Hello Everyone!
    We did a transport on our OKK MCV 520. The System on it is a Fanuc, its an old machine.
    When we plugged in the machine we got an error code: "EX 37, Broken Thermal For Motor"
    Anyone got any idea where to start?

  2. #2
    Join Date
    Oct 2007
    Posts
    106

    Re: Got a problem with OKK MCV 520.

    This was one year ago so I assume that you already found the solution.

    I had the same alarm, it was an open line of 24VDC thas goes thru the magnetic/thermal breakers.

    I

  3. #3
    Join Date
    Mar 2021
    Posts
    1

    Re: Got a problem with OKK MCV 520.

    Hello, I just plugged in ab old OKK MCV820 that I picked and I'm getting the same error code: Broken Thermal For Motor, can anyone elaborate on erd39030's response?

Similar Threads

  1. Having problem with CNC driver/card problem
    By todatop in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 04-09-2014, 05:45 PM
  2. Tube problem or powersupply problem? Help you to check out
    By Melody-gweike in forum Laser Engraving / Cutting Machine General Topics
    Replies: 0
    Last Post: 10-05-2012, 04:09 AM
  3. daewoo puma 12lb tape format problem/parameter problem
    By robb12877 in forum Daewoo/Doosan
    Replies: 0
    Last Post: 08-25-2011, 06:13 AM
  4. Replies: 5
    Last Post: 08-04-2010, 11:33 PM
  5. machine problem or software problem?
    By bcnc in forum Syil Products
    Replies: 8
    Last Post: 10-26-2009, 03:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •