I am looking for x and y axis ball screws for a Roboform 400 1990 vintage. Anybody had and luck with any certain remanufacture over another? I am going to do the disassembly and reassembly myself.
Results 1 to 1 of 1
-
08-07-2009, 02:33 PM #1
Registered
- Join Date
- Nov 2006
- Posts
- 382
ball screw rebuild or replace Roboform 400
Jetski (alias Tooling and Engineering Czar)
"I may not have the keys to success.. but I have learned to pick the locks"
Reply With QuoteSimilar Threads
-
replace CRT on charmille roboform 20
By shazam/TPP in forum EDM Discussion General TopicsReplies: 11Last Post: 08-25-2009, 05:40 AM -
Ball screws, backlash is BAD! rebuild? run it? nut 101
By bob1112 in forum Linear and Rotary MotionReplies: 3Last Post: 01-26-2008, 10:34 PM -
How much to rebuild series 2 ball screws?
By camarogod98 in forum Bridgeport / Hardinge MillsReplies: 2Last Post: 04-26-2007, 02:51 PM -
Belts to replace long ball screws? What are your thoughts??
By runinbymdnt in forum Linear and Rotary MotionReplies: 11Last Post: 02-17-2007, 11:31 PM -
New technology.... old debate.....ball screw vs lead screw
By trubleshtr in forum Linear and Rotary MotionReplies: 1Last Post: 08-16-2005, 02:42 AM
Posting Permissions
