just before i go ahead is there anyway to take the z axis coupler out without having to takeout the z axis ballscrew the coupler has snapped and i need to change it but i cant see how i could do it without taking the screw out.
Results 1 to 2 of 2
-
08-07-2009, 11:00 PM #1
Registered
- Join Date
- Jul 2005
- Posts
- 969
changing z axis motor coupler on the x4+
The opinions expressed in this post are my own. -Les opinions exprimé dans ce messages sont les mienne
-
08-07-2009, 11:57 PM #2
Member
- Join Date
- Jul 2006
- Posts
- 741
I can not say with certainty, but if I remember correctly, and if the X4 is similar to the SX3, if you take the top limiter of the Z axis (the black forged piece at the top of the Z screw) and free the bearings at the bottom you may get enough wiggle room.
Reply With QuoteSimilar Threads
-
Shopsabre Motor Coupler?
By MarkWink in forum ShopsabreReplies: 1Last Post: 01-10-2009, 09:12 PM -
Broken Motor to BallScrew coupler
By IMK1230 in forum Syil ProductsReplies: 11Last Post: 01-05-2009, 03:29 PM -
SX3 Z axis won't move (4/20 Problem solved-Coupler)
By metalworkz in forum Syil ProductsReplies: 10Last Post: 04-27-2008, 04:52 AM -
Coupler motor question
By MagTDK in forum DIY CNC Router Table MachinesReplies: 7Last Post: 08-07-2006, 11:37 PM -
Making a coupler between motor and lead screw
By nikolatesla20 in forum Mechanical Calculations/Engineering DesignReplies: 8Last Post: 07-30-2005, 07:05 PM
Posting Permissions
