584,830 active members*
5,379 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2007
    Posts
    29

    strippit 1000xp with apple control

    hi, we recently bougth a strippit 1000xp with apple control, it was installed some days ago, and cant run it because when it start the mac stays in the "initializing motion system" (or something like it about the motion), the servodrives status is green for the 4 of them, but it never advances from that point. When the pc get to this screen i can push the side gauge up and down and open and close the clamps, but thats all. It doesent start the hidrahulic unit or the ram motor, any guess?

  2. #2
    Join Date
    Dec 2003
    Posts
    24216
    It has been a while since I worked on one, but one of the things to check is that air is on and the pressure switch is activated.
    The enable relay has to be on. One of 4? on the I/O board.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  3. #3

    CNC Control retrofit

    Hi,
    We offer a complete retrofit package for this machine. The control is PC based, touch screen, graphical and runs all your existing G/M code programs. Can be fitted by yourselves or we offer an installation service. We have retofitted many XP and FC Strippit machines.

    Go to HOME for our details.

Similar Threads

  1. Strippit Cap 1000
    By SGARCIAM in forum MetalWork Discussion
    Replies: 2
    Last Post: 08-10-2011, 02:52 PM
  2. strippit cap 1000 with fanuc 0p control
    By jaimeeduardo in forum Fanuc
    Replies: 0
    Last Post: 08-10-2009, 05:04 PM
  3. Old Apple NC control software
    By sp1nm0nkey in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 06-18-2009, 05:51 AM
  4. Strippit Hecc 80/3 control help
    By javajesus in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 04-06-2009, 07:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •