584,871 active members*
5,191 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2009
    Posts
    1

    doosan 2020 turret alarm

    hi dont know if anyone can help but i accidently hit the emergency stop on a doosan s280 lathe while the turret was indexing i homed the axis out spun the turret round but i get a alarm saying turret needs home postion 2020 alarm i can index the turret round in manual mode and also in mdi and its goes to the correct tool but the alarm stays on and wont let me run the job
    i guess there must be a code i can enter to reset this ?

    many thanks

  2. #2
    Join Date
    Nov 2004
    Posts
    3028
    Look in the ladders for what is causing the alarm. I know that some servo turret alarms are cleared by changing keep relay 15.4 because the turret did not complete the index.
    Verify this in ladders!

    George
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Jun 2009
    Posts
    20
    hi,how r u?can u tell me your machine model ? u get the alam 2020 is break circuit protect'issue!

  4. #4
    Join Date
    Jul 2008
    Posts
    37
    Dear friends

    I have faced a problem with turret in fact after I started the machine for first time evrything is ok unless the turret position it's about 15 degrees different from original position.

    Does anyone know about this problem.

    As we have come to conclusion Grid Shift Maybe effective but we don't know how to it.
    in fact in Fanuc manuals there was nothing about this point!

    The machine model is : Doturn 310

    Thanks in advance.

    Jalal

Similar Threads

  1. servo turret alarm
    By Hifeed in forum Fanuc
    Replies: 4
    Last Post: 05-01-2020, 01:22 AM
  2. Daewoo Puma 300 lathe turret alarm
    By rollman in forum Daewoo/Doosan
    Replies: 26
    Last Post: 04-24-2015, 08:27 PM
  3. DOOSAN Z290SM TWIN TURRET LATHE
    By CHAD LAWSON in forum Daewoo/Doosan
    Replies: 0
    Last Post: 01-22-2009, 03:25 PM
  4. Doosan Z290SMY turret problem
    By alesko05 in forum Daewoo/Doosan
    Replies: 1
    Last Post: 10-05-2008, 02:04 PM
  5. doosan fanuc 18t turret
    By julio_gyn in forum Fanuc
    Replies: 3
    Last Post: 05-19-2008, 06:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •