hi
i have a c11g rev 5.4 board , is it possible to control the direction of the spindle from mach and not only the on off function and speed. i have a commercial vfd with frw,rew and com terminals.
hi
i have a c11g rev 5.4 board , is it possible to control the direction of the spindle from mach and not only the on off function and speed. i have a commercial vfd with frw,rew and com terminals.
rev 5.4 board has only one mechanical relay , but it seems that i need 2 one for starting and stopping and the second for directional change. so how do i wire the board with just 1 relay ?
You need one for each direction, at least for my vfd I did, you could one of these:
http://www.cnc4pc.com/Store/osc/prod...roducts_id=133
This is the one I have:
http://www.cnc4pc.com/Store/osc/prod...roducts_id=148
thanks