Hey guys,


I am starting a small CNC project to see the feasibility of a full scale CNC mill and I had a friend pull some steppers from a copier/s but don't know what the specs are...

On the stepper it says the following:

Astrosyn
Type: 23KM-J213-G1V
NO: T2522-01
MINEBEA CO.LTD

I went on their website but couldn't find anything on them, and these steppers are 6 wire steppers so I am going to guess that they are unipolar but can be wired to be bipolar. So all I want to know is what voltage and operating specifications they have as well as the pin out diagram for the 6 pins.


Thanks for your time guys...