Originally Posted by
Indmach
First you home the machine make sure both x and Z is at home position.
Make both screen 0.00 if don't know press x and hit orgin and press z and hit orgin now do same with U and W.
make sure that your chuck is clamped not open, and there is one swich under your screen, which is used for two operations holding parts from inside and holding parts from outside make sure it is on holding part from out side and when you press the peddle your chuck should close,
Now try this programme
G50 S1000;
G96 OR G97 S500 T101 M42 M3; (M42 IS FOR MIDDLE GEAR OR HIGH GEAR)
G50 x10. Z10.;
GO X5.00 Z.1;
G90 X4.9 Z-2.00 F.01;
GO X7.00 Z.1;
G28 X7.00 Z.1
M30
IT SHOULD COME AND MAKE 4.9 DIA 2.00 LONG AND GO BACK HOME AGAIN
IF NOT PLEASE CALL ME i HAVE SAME TYPE OF MACHINE I MESS AROUND WITH IT FOR LONG TIME NOW I AM GETTING USE TO IT ITS A VERY STRONG MACHINE.
1-519-791-0874
RON @ INDUSTRIAL MACHINING INC
I AM IN WINDSOR CANADA