having problem with mastercam X. everytime I move mouse over the left side of screen or try to draw anything the background turns white and won't allow me to do anything, any pointers or suggestions would be appreciated. Jim
Thread: background turns white????
Results 1 to 4 of 4
-
08-27-2009, 11:41 AM #1
Registered
- Join Date
- Dec 2007
- Posts
- 9
background turns white????
-
09-02-2009, 02:08 AM #2
Registered
- Join Date
- Jul 2005
- Posts
- 42
Go to settings, configuration then on left menu, click on "screen" option, check the disable hardware acceleration box. And make sure you are using OpenGL option checked. Then apply/accept. Try that.
-
09-02-2009, 12:57 PM #3
Registered
- Join Date
- Dec 2008
- Posts
- 79
x2 for disable hardware acceleration
looks like a video card issue
-
09-03-2009, 04:19 PM #4
Registered
- Join Date
- Sep 2009
- Posts
- 16
I had the same issue and had to turn off hardware acceleration. Then I played with the colors so i could see when pre-selection was happening.
Reply With QuoteSimilar Threads
-
4th axis turns to many turns
By cob in forum MastercamReplies: 6Last Post: 02-16-2009, 07:19 PM -
Background Color
By weirdharold in forum UG NXReplies: 4Last Post: 11-23-2008, 02:43 PM -
Background bitmap?
By THend in forum MastercamReplies: 2Last Post: 05-31-2008, 10:33 PM -
background in artcam
By menewfy in forum ArtCam ProReplies: 6Last Post: 07-24-2007, 07:35 AM -
I'm done, but nothing turns
By pbarsalou in forum DIY CNC Router Table MachinesReplies: 11Last Post: 04-08-2007, 05:15 AM
Posting Permissions
