584,800 active members*
4,365 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Hypermill > Stock model layer disappearing.
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2009
    Posts
    3

    Stock model layer disappearing.

    Im using Hypermill 2009.1 I have a stock model with the finished part model inside on seperate layers. When trying to define the stock model it says that it is an open model, model analysis shows no warnings. After that the layer will not display, even though the display toggel shows it as displayed. The green box turns gray. The rest of the layers display fine. Any suggestions on what Im doing wrong? Thanks.

  2. #2
    Join Date
    Aug 2009
    Posts
    3
    Thanks for your help today Alan Z.

Similar Threads

  1. Memory is disappearing. Why???
    By g-codeguy in forum Okuma
    Replies: 1
    Last Post: 04-21-2008, 05:53 PM
  2. A disappearing trade? real toolmakers
    By JROM in forum MetalWork Discussion
    Replies: 5
    Last Post: 08-13-2007, 07:18 PM
  3. Disappearing surfaces
    By Jim Estes in forum BobCad-Cam
    Replies: 3
    Last Post: 02-22-2007, 05:46 PM
  4. Stock Model Management
    By Alan L in forum Hypermill
    Replies: 14
    Last Post: 02-01-2007, 04:31 PM
  5. 3d stock model
    By camtd in forum EdgeCam
    Replies: 2
    Last Post: 10-20-2006, 05:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •