Seeing that their is so much talent, I'd like to see what you guys can come up with for a new cnczone logo it needs to be 300 x 80 and only jpeg or gif.
Seeing that their is so much talent, I'd like to see what you guys can come up with for a new cnczone logo it needs to be 300 x 80 and only jpeg or gif.
I like the one you have. Did you create that?
Thanks
Jeff Davis (HomeCNC)
http://www.homecnc.info
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
no my sister in law did, under my direction.
I will be in on this. Will you accept a bikini model with a tatoo of CNCzone on her leg ....LOL
Being outside the square !!!
uh NO.
Here is a few 5 minute jobbie just to get the ball rolling.
Nevermind...
I like to one I have to but maybe we can improve it.
Maybe kinda like a Hobby Industrial.... cant think of the metal, you know on truck toolboxes.... and make it a curved background like you have, I would do it but dont have the software to.
Heres one I made up quick(about a hour from scratch) I didnt put any background in but it was for fun anyway. O and it is bigger than suggested but It was all scrunched up when it was that size and I didnt feel like messing with it anymore since it was 1am. I'll fix it later
Enjoy
Any restrictions other than size?
This is just a variation on the original one.
It has a sense of prestige and expense about it.
EDIT. It looks better when not in thumbnail.
Originally Posted by ynneb
WOOOO benny, that is sweet! That is the best I have seen, I love the way you gave it a depth of feel. Play with the colors a bit now that i have the logo on the site.
Hey benny, see if you can make one look like machined billet aluminum. that might be pretty cool.
Jon
Yeah I agree.
That looks very cool too.Originally Posted by moto21
I fixed it and added a little background to it.
And here's one from me
Do I win a load of gecko drives now?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
What program are you using to make those?Originally Posted by ynneb
I would love to know what program you are using to make those, Benny.
You guys are good!
I considered an animation of the logo getting cut out (like that Ford logo on the comercials), but don't have the time.
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)