524,406 active members*
2,854 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Registered
    Join Date
    Sep 2009
    Posts
    3

    Exclamation NakaMura Tome TMC-30

    I just recently installed a new axis lubrication unit onto this machine. I'm trying to get into the parameters and change the time amount for lubrication. Found the parameters but, it's all number coded... I'm guessing. It shows a number i.e. 0267 and than a binary code i.e. 01101. I'm guessing the first number is the parameter address (What it does) and then the binary part is it's commands. How do I find out the parameter for axis lubrication. I checked all the manuals and surprisingly they don't say anything about the machines 0parameters. Can anyone help?

  2. #2
    Registered
    Join Date
    Mar 2008
    Posts
    442
    Call Methods Machine Tools on Monday morning, they'll tell you what the right parameters to change are, and what values to use.

    978-443-5388

    Have your machine's serial number ready when you call!

  3. #3
    Registered
    Join Date
    Aug 2011
    Posts
    0

    Nakamura Tome

    What do you need help with?

    I need help too. I resently purchased a used 1992 tmc-35BX with a fanuc OTTC control and I need programing, opearator and maintenance manuals. I do not know if our machines are close enough but it would be great if you could help. I will gladly pay. Don

  4. #4
    Registered
    Join Date
    Aug 2011
    Posts
    0

    Nakamura Tome

    Sorry I can not help you with your problem. Howerver I have a problem that maybe you can help me with. I resently purchased a 1992 tmc-35bx with a fancuc OTTC control. I need a operator, maintenace, and program manuals.
    I do not know if you machine is close to the same but it would be great if you could help me out. I will gladly pay.

  5. #5
    Registered
    Join Date
    Aug 2011
    Posts
    0
    I have a problem that maybe you can help me wit


  6. #6
    Registered
    Join Date
    Aug 2011
    Posts
    0

    Nakamura Tome

    gavinkong13
    Not sure if you were trying to reply? I only got part of the message.
    don@dieshop.com

Similar Threads

  1. Nakamura-Tome TMC-2 Fanuc 3T
    By Leblondmakino in forum Fanuc
    Replies: 17
    Last Post: 06-10-2012, 06:29 PM
  2. Parameters for Nakamura-Tome TMC-2
    By myh in forum General MetalWork Discussion
    Replies: 3
    Last Post: 09-11-2009, 09:40 PM
  3. Nakamura TMC 4 TOME
    By mjblum in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 11-05-2008, 05:36 PM
  4. Nakamura-Tome Training
    By MaCroB in forum General MetalWork Discussion
    Replies: 1
    Last Post: 09-24-2008, 08:45 PM
  5. Nakamura Tome Question
    By craven12 in forum Uncategorised MetalWorking Machines
    Replies: 4
    Last Post: 04-22-2008, 08:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •