Is anyone using routing in Solidworks? I just started putting hydralic hose into our machines. I got the connectors working and the route looks just like it should. Now I want to make a 2D drawing showing the length of the hose. It seems like I should have a flat mode like in sheet metal that will make the hose straight and flat so I can add dims. However I don't see this anywhere. The only thing I see like this is for the electrical not the flex tube.
Thread: Routing Drawings
Results 1 to 2 of 2
-
09-10-2009, 02:50 PM #1
Registered
- Join Date
- Feb 2007
- Posts
- 40
Routing Drawings
-
09-11-2009, 01:13 AM #2
Registered
- Join Date
- Feb 2007
- Posts
- 40
So no one is using routing. I found some good videos on Youtube but the only thing for drawings is electrical. Here is a couple pictures of what I am working on. You can see the hoses in pink. If I find a way to do it I will post back.
Thanks
Reply With QuoteSimilar Threads
-
No dxf/cad drawings
By plexer in forum Uncategorised WoodWorking MachinesReplies: 7Last Post: 08-14-2010, 06:33 PM -
drawing board drawings to cad drawings
By mike hide in forum Uncategorised CAM DiscussionReplies: 5Last Post: 03-23-2009, 10:35 AM -
Need Help with Drawings
By dleroi in forum Uncategorised CAD DiscussionReplies: 3Last Post: 02-21-2009, 11:06 PM -
KM3 and KM-3P Drawings
By freak_brain in forum HURCOReplies: 2Last Post: 02-14-2009, 02:36 PM -
CAD Drawings
By rfmerrill in forum Uncategorised CAM DiscussionReplies: 0Last Post: 05-03-2005, 12:43 AM
Posting Permissions
