Hi i have lost the parameters on my bridgeport interact series 1 MK2 with a tnc 151.
Dose anyone where to get them and the reason why i lost them.
The machine had not been turned on for two months plus it was asking for The buffer batteries changing what ever the are.
Results 1 to 12 of 12
-
09-14-2009, 08:49 PM #1
Registered
- Join Date
- Jun 2009
- Posts
- 5
bridgeport interact 1 lost parameters
-
09-15-2009, 02:53 AM #2
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
The parameters are kept in memory by the use of the 3 AA back up batteries.
If you remove the batteries with the control OFF, you will lose the parameters.
THUS, keep the control ON when replacing these batteries.
All interact machines in the USA came with a red box that contained the manuals and a hard copy of the parameters. Most are generic, but a few are machine specific such as backlash, and distance of travel to each side of the home switch.
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
09-15-2009, 05:43 PM #3
Registered
- Join Date
- Jun 2009
- Posts
- 5
thanks for your reply got the parameters,batteries were corioded
-
09-17-2009, 02:37 AM #4
Registered
- Join Date
- Jul 2009
- Posts
- 37
I have the same machine (interact 1 MK2) with the 155 controller. Can I get a copy of the parameter list also? I have a spare 151, and the documentation shows the parameters are the same. Thanks
Brian
-
09-13-2010, 02:29 PM #5
Registered
- Join Date
- Sep 2010
- Posts
- 0
Parameter file
Could you please send me an email to: [email protected]
I lost my parameters too. I have a Interact1 MK 2. I'd really appreciate it.
Thanks,
Rich
-
09-14-2010, 04:56 AM #6
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
With which control?
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
09-14-2010, 12:44 PM #7
Registered
- Join Date
- Jan 2005
- Posts
- 1121
151 parameters are posted elsewhere in this forum
-
09-16-2010, 05:38 PM #8
Registered
- Join Date
- Sep 2010
- Posts
- 0
It has a Heidenhaim 151 controller.
If there are parameters posted in this forum, how do I find them?
-
03-29-2012, 06:37 AM #9
Registered
- Join Date
- Mar 2012
- Posts
- 0
Please,I need help,I am using Bridgeport Interact 300,Software no. 259950 02,PLC software no.250144 08 , I only changed the back up battery,lost its machine parameter...anyone...please help me find its parameter.Thanks!!!
Originally Posted by machintek
-
03-29-2012, 06:44 AM #10
Registered
- Join Date
- Mar 2012
- Posts
- 0
By D way Controller is TNC 2500 B
-
01-27-2015, 09:47 AM #11
- Join Date
- May 2014
- Posts
- 37
Re: bridgeport interact 1 lost parameters
Hi! Sorry I know this is an old thread but I have a Bridgeport series 2 MDI with TNC145, I need to replace butter batteries but I don't know where they are located.. could anyone shed some light on this?
-
02-02-2015, 10:35 PM #12
Registered
- Join Date
- Apr 2007
- Posts
- 8
Re: bridgeport interact 1 lost parameters
Not 100 % sure on TNC 145 but they are normally under a plastic cap with a screwdriver cut in it on the front of the control.
Reply With QuoteSimilar Threads
-
Interact 1 Mk2 Tnc370 lost parameters
By cevyil in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 02-20-2012, 11:37 AM -
Interact II Lost Parameters now spindle wont come on.
By Shanghyd in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 11-13-2011, 05:10 AM -
Interact 412B parameters lost.
By GPena in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 09-10-2009, 06:52 PM -
HELP...interact 4 lost parameters
By camarogod98 in forum Bridgeport / Hardinge MillsReplies: 17Last Post: 02-13-2007, 01:50 AM
Tags for this Thread
Posting Permissions
