Would someone know how to manualy set the travel distance, since I have tried the auto Cal for X,Y,Z didn't work as it set the steps to 6400 and nothing moved.
I move the distance 1" and the software says 9" How would I fix this??
Currently it set to 1600/ 400/ 90
Results 1 to 2 of 2
-
09-26-2009, 03:59 AM #1
Registered
- Join Date
- Dec 2007
- Posts
- 9
Mach 3 travel distance HELP! Please.
-
09-26-2009, 04:09 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
multiply steps/unit by 9.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Z Axis Travel Distance
By WarrenW in forum DIY CNC Router Table MachinesReplies: 8Last Post: 06-01-2010, 12:57 AM -
Distance Counter
By jcambra in forum Mach MillReplies: 2Last Post: 04-16-2009, 07:43 AM -
distance z axis can travel
By mostlund in forum DIY CNC Router Table MachinesReplies: 7Last Post: 12-15-2008, 05:04 AM -
What's your max distance to encoder?
By murphy625 in forum CNC Machine Related ElectronicsReplies: 5Last Post: 05-12-2005, 04:57 PM -
Travel distance is inaccurate.
By thuffner3 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 11Last Post: 12-15-2004, 03:32 PM
Posting Permissions
