508,545 active members
3,579 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jan 2007
    Posts
    22

    Mill spindle regrinding setups?

    After some ideas of how people have setup to regrind a taper in a spindle. I'm trying to come up with a simple setup to regrind the taper for my Bridgeport mill (R8 taper). I have a cylindrical grinder, I can get the required angle with the table shift, just what's an easy way to drive the spindle when grinding? And how have people mounted the spindle on the table?

    Pictures say a thousand words...



    Thanks.

  2. #2

Similar Threads

  1. Recommendations for R8 spindle taper regrinding
    By barbque in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 06-11-2009, 11:45 PM
  2. Setups Units
    By boyvox in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 10-17-2006, 03:47 PM
  3. Regrinding X Axis ways of '92 VMC20
    By MidfieldJake in forum Fadal
    Replies: 3
    Last Post: 08-04-2006, 04:29 PM
  4. how to learn different setups on a V mill
    By BeeleJuice in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 06-08-2006, 05:38 AM
  5. Regrinding spindle taper hole
    By Ch_Irawan in forum Mechanical Calculations/Engineering Design
    Replies: 27
    Last Post: 03-12-2006, 09:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •