[yumuri]

I just buy a CNC HITACHI SEIKI 5NE TURNING CENTER MODEL 1100,BUT I'm not profesional operetor but i so intersted in learn it,but i have two problems:

1.why the screen shown axes U,W instead of X,Z. ( but momentarily can make the change manually)

2. and when I use the jog position and I want to move the axis -Z with the jostick, the carriage made to move but not moving.the machine does not move, and then the screen shows an Alarm message: 04097-N4097.
421 Z SERV.
Please if anyone wants to share their knowledge !!!!letf your message,thanks.

[vewengg]

Dear Sir,
I have the same machine , I have a problem with my machine parameters. If you can forward me your machine parameters , I will be able to solve your problem . It will be mutually beneficial. my e-mail ID [email protected]

with regards

Manju Prasad

[yumuri]

DO YOU STILL NEED THE PARAMETERS?

[SunilJadhav]

Dear Sir ,
Got your reference from the net .
You have a Hitachi seiki 5NE machine with you .
I also have a similar machine in my workshop .
I require the parameters for this machine .
i will be very much grateful to you if you can give me the parameters list .
Thanks

SUNIL JADHAV
DM Solutions
Tel : +91 20 30781525
Mob : +91 9371061418

[Viejolobo]

Hey friends,
I Just bought Hitachi Seiki 5NE 1100 lathe , can anyone help me find operators manual?
does anyone can share it or were i must search for it?
Many thanks anyway!!!

[Viejolobo]

DO YOU STILL NEED THE PARAMETERS?

Hello yumuri,

Do you have operators manual for this Hitachi seiki lathe ?

[Viejolobo]

Hello Sunil ,
Do you still have this Hitachi Seiki Lathe,
I have been searching for operators manual do you know were i can find it on the web?

Dear Sir ,
Got your reference from the net .
You have a Hitachi seiki 5NE machine with you .
I also have a similar machine in my workshop .
I require the parameters for this machine .
i will be very much grateful to you if you can give me the parameters list .
Thanks

SUNIL JADHAV
DM Solutions
Tel : +91 20 30781525
Mob : +91 9371061418

[SunilJadhav]

Hello Sir ,
I have the machine with me .
What is the control on your machine and what is the year of manufacturing .
I have full set of the manuals . can you help me with the parameters .
Where are you located .
Thanks

Sunil Jadhav

[Viejolobo]

Hello Sunil ,
Here is my email for direct contact [email protected]
Contact me for more details.
Carlos Rodríguez

[klevin]

DO YOU STILL NEED THE PARAMETERS?
[email protected]
www.jstc.it
00393934690113

[Tools]

I have a 4NE-600 but if I am not mistaken the operation of the machines are the same because the controls are the same. I have a full set of the operator and maintenance manuals on paper. I would be willing to digitize them or copy them. Shot me a PM and we can work something out. Control specific things are going to be in a FANUC book not one from the machine too makers.

[juanfmoralese]

Hitachi Seiki 4NE-600 parameterParameter 6TA10010101001010110110110011011010000011001011010 00000111001111001001110111000000110100111011100101 00011100000100000220000000025000000000000000000000 000001050030100030102020005005000060006000003176-21650014341792003000205000100000080120000000800500 02500000005001201023000506138331530-1-1000000200000000000220001100000-454000-63100000-53000-594000-454000-77000-53000-594000-454000-770000-110000-386200000000

[juanfmoralese]

Dear friends
I need operation manual, wiring diagram, for a 5NE-1100 hitachi seiki lathe 1980 with fanuc 6T control
thanks

[Seintec]

Estimados amigo favor ocupo el diagrama electrico de un torno cnc hitachi 5NE-1100 control fanuc 18T favor si alguien lo tiene compartan mi correo [email protected]