[9xpro02]

Dear Sir.
I have same problem.
So please sent to me the procedure.

I am very grateful with your help.

Thanks and Best Regards.

[9xpro02]

This is my email address: [email protected]

Thank you so much for your help.

[Alpha911]

I understand New Zealand (have customers there). Turn the control on pressing 7 and 9. when you are in the ipl screen enter 99 , press INPUT,enter the first 8 digit group and press INPUT, next group and press INPUT, last group
and press INPUT. The screen should now show:
SYSTEM GENERATE
CHECK SYSTEM LABEL :PASS
AXIS ?
now enter # of axes (param 9000) and press INPUT; you will see:
OPTION 01 ? this is param 9100 : enter in hexadecimal and press INPUT
OPTION 02 ? this is param 9101 : enter in hexadecimal and press INPUT
etc. If you make a mistake, you must start all over.
Bill

Thank you for helping the User here. I have the same problem. After im in the IPL Screen and ENTER 99, the screen doesnt show my 8 digit number AFTER i put the 8 digit number.

Possible to help me? Would be great!

[rvlaxz11]

Buenas tardes alguien tiene la lista de parámetros fanuc 15m q.me.pueda proporcionar