[keith20mm]

Is there a way to get the X-Y Position value to match the cursor position shown at the lower right? It appears that the dimension is set to show 4 digits right of decimal point, whereas the cursor position is limited to 3 digits right of decimal point.

[sqatch]

there is a dimension setup icon that is available when you select the dimension tool bar in there are your decimal place settings and other parameters.

[keith20mm]

Let me restate my question: Is there a means to set or increase the number of decimal places shown in the lower right cursor position display?

My dimension decimal places is set to 4, the cursor position displays 3 digits right of decimal point, so that when I select x-y position, and the selector cursor is around a point (not 'near'), then the displayed x-y dimension value can differ from the indicated cursor value by anywhere from .0001 to .0009

Thanks in advance.

[andre-dolphin]

Hello,

Sorry, but it looks like the display is set to 3 decimal plaes.

ATB
Andre