584,850 active members*
4,568 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2009
    Posts
    1

    Need help with Mitsubishi CNC MELDAS C64, will pay $1k

    Need to solve the following problem:

    I need to check if the servo/spindle drive is broken or not.
    I have the following drives:
    servo drive mitsubishi mds-c1-v2
    spindle drives MDS-C1-SP-150, 260, 300.

    My setup is:
    Mitsubishi CNC MELDAS C64+sensor screen
    one of the drive mentioned above
    Motor HC353BS (or a different one for spindle)
    Power supply MDS CV-260
    All this is NOT connected to a machine.

    I need to make the motor run in the Jog mode for example (or other modes if easier to implement) to see if the drive works.

    If you help me to setup and configure/program these elements for what i want I will pay you $1000. I will get any components needed to make it work as well.

    Let me know if you interested here in the thread or though a personal message.

  2. #2
    Join Date
    Feb 2011
    Posts
    0

Similar Threads

  1. Mitsubishi Meldas 300-V
    By firestaromega in forum Computers / Desktops / Networking
    Replies: 6
    Last Post: 10-03-2023, 08:00 AM
  2. Mitsubishi Meldas L3
    By hutch07 in forum MetalWork Discussion
    Replies: 6
    Last Post: 07-30-2022, 07:42 AM
  3. Mitsubishi Meldas 300
    By hlabib in forum Mitsubishi controls
    Replies: 20
    Last Post: 04-20-2022, 05:19 PM
  4. Mitsubishi Meldas 60S
    By BKCOM in forum Mitsubishi controls
    Replies: 3
    Last Post: 11-28-2016, 03:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •