I've been praticing with the Mill Level 1 tutorial book (X3) I've purchased and I am having problems with creating the geometry for Tutorial 5 exercise 2.
I've drawn the 0.5 arc at the distance of 1.625 from the origin. Created the center lines at 45 degrees. Created the 2 diameters of 1, 1.75. My question is how can I create the radius of 1.328 at a angle lenth of 4.2880 ?Also where / how can I find the center point of the diameter 6.5.
If someone can help me that would be great.
Again thanks for your help in advance.