[jon0605]

Looking for anyone that is operating a Morbidelli U26 point to point. We have recenlty bought and set up this machine and I am looking for anyone with experience programming and using the TRIA 6000 controller. I am looking at getting Alpha CAM or Mastercam to post to this controller. Any general information on the machine would be greatly apppreciated as we have not run the machine other than getting power to it and moving around the axis. I am going to atttempt to write a program manually to fire up the router today. Trying not to get SCMI involved.

[decolinesarl]

Hey, did u get the programming manual, well i just fell in the same problem , i need the programming manual. Other manuals i all have , if you need them tell me.
I even have the parameters , but i need the programing manual . my email is [email protected] .
regards

Elie

[mifa]

Hello jon0605!

I struggled with this problem, and finally found a solution here in the forum and help in programming. if I should be happy to send the control supplement.
TRIA 4000-6000 program the easiest Controller sheetcam TNG's what I use it works well for translation pgm does go away

[sanderson1987]

Hello Mifa,

I also buy an morbidellie U26.
And looking for some CAD/CAM possibileties. Could you maby send me the control supplent?

What kind of CAD/CAM you use for the U26?

Tanks a lot,

Sander

[mifa]

Hi Sander!
I have a program I use Google SketchUp Pro, which is very fast and make a drawing can be saved in DXF format. sheetcam tng the program and translations.
The price is also very good and the 2.5 D knows this is what you post and compiler
Can you send a private letter itself if necessary.
But you can use all the drawing autocad cad and similar programs.
I think the fastest you google sketchup develop further.

would be free to contact me if any questions, I can help.

Regards Matthias

[Service SCM BR]

I advise the Aspan or AlphaCAM for morbidelli machine with Tria


Via iPhone of the Tapatalk