Hello!
Machine is SH-5000, with MSG-502.
Allright, we are trying to make our Mori's faster at work..
So far we only come up with "light tool" setting to make tool change faster.
I have some questions that i hope someone can answer.
-When machining with a tool is done, we use G91 G0 G30 Z0 S0, (then same with X and Y)
But machine waits til' spindle is 0rpm before making x and y movements for next tool change, how do we set it so it does the x and y movement during spindle braking down? M5 does same thing..
-When machining is done with tool, and we want a tool break check, it starts of course braking down spindle at the Z specified at last movement..
Waits there til its 0rpm, makes a spindle orientation..
Then goes to machine 0 point for Z and position for tool measurement.
Can we make it to brake down, move to machine 0 point for Z, position for tool lenght check, while braking down?
-Is there anyway to make spindle to come up in rpm faster?
And braking down faster?
Hmm, thats what i got in my mind right now..
Is there any parameter settings that are known that we could try?
Any help welcome