We have a lot of Hurco's in our shop all Max 2's and Max 3's. We are starting to have a rash of hard drive failures on the Max 3's and are having problems finding older drives to replace them with. I am also worried that the software keys (the one in the printer port) will go out. I have heard that they have a limited life. Is there anyway to copy and duplicate these keys? We are doing everything we can to keep these machines going. Thanks
Thread: Max 3 Dallas Ram Key
Results 1 to 2 of 2
-
11-11-2009, 04:48 PM #1
Registered
- Join Date
- Oct 2007
- Posts
- 74
Max 3 Dallas Ram Key
-
11-11-2009, 05:19 PM #2
Member
- Join Date
- Jun 2008
- Posts
- 1104
Why don't you just use laptop drives? All I fit to old MAX3 controls are 2.5" hard drives. Are you loading these yourself? If the old Dallas dongles fail, you can have a Peak715 cpu fitted and the software upped to 2.36 (dongle-less).
Reply With QuoteSimilar Threads
-
North Dallas, TX
By osphoto in forum Mentors & Apprentice LocatorReplies: 293Last Post: 06-29-2016, 09:28 PM -
Mentor needed Dallas, TX
By jhelmstetter in forum Mentors & Apprentice LocatorReplies: 8Last Post: 10-05-2010, 06:47 PM -
Help With Turbo Cnc Near Dallas Texas
By dan dimock in forum Mentors & Apprentice LocatorReplies: 5Last Post: 04-13-2009, 12:39 AM -
looking for mentor in Dallas, Tx area (south Dallas)
By SatanKlawz in forum Mentors & Apprentice LocatorReplies: 0Last Post: 06-01-2006, 03:18 AM -
Seminar in Dallas
By kenlambert in forum Uncategorised CAD DiscussionReplies: 0Last Post: 01-25-2006, 10:14 PM
Posting Permissions
