Hi, My name cncrobots.
Hi, My name cncrobots.
Hi all
as I promise I am posting some of our early cutting and engraving using EXLAS 1280 Last cutting and engraving products..
1-Over look to the EXLAS . nicely designed I have to admit.
2-inside motor very nicely fixed & Professional ball screw lifting table with 2 motor drive
3-side reflecting mirror, easy to be alignment.
4-excellent output cutting and engraving wood at very high speed.
5-side door looking to power supply and controller.
6-Clean acrylic cutting.
My over look of the machine and its performance for our work, we are very pleased with the results. Sharp and clean cutting acrylic and wood. Engraving we do need to do some tricks in Photoshop and get excellent result from the EXLAS. For any architect need to do models, I hardly recommended over the EPLOG, it is much easy to handle and faster and cheaper. My advice don’t get 80w power you will not need it , 60 is better for us, we do have plane to get smaller EXLAS 6040 instead of fixing our EPLOG, re filing the 25w laser and getting new mirror and lens will cost us more than 2.5k. adding lettil more than we will get new small EXLAS in office.
Mohammad
Kabli,really appreciate your comment and interest in it..
would you sare us some good experience with this supplier??
quality, price and after sale service.
I decide to go for a two head laser engraver and don't want deal with unresponsive seller If we don't keep calling, emailing,they don't response at all.
Thks
CRBM
Dear all who care here,
The whole team of XYZ Machinery wish all freinds a Merry Christmas and Happy New Year.
Best Wishes.
XYZ team
I also would like to share my experience but with woodworking machine.
First of all I have to say that I'm impress of this machine. The precision is excelent and speeds are quite impresive.
In the begining I've got some problems with Panasonic Servo Driver (It was panasonic fault). But the main reason i decide to tell about it was perfect support from Mike (e-mails skype etc.).After determined source of problem We was sended damaged part and about two weeks later I was surprised see it again.
I will agree with Sound Wave, I was very pleased to impressed with the quality. A part damaged during shipping was immediately replaced.
My only complaint thus far is that they have been building equipment long enough to provide a complete and understandable operators manual for both the equipment and LaserCut the software.
They are not alone in this, why Chinese laser manufacturers do not see the importance in updating their manuals like they have improved their manufacturing quality is baffling to me.
Apart from that, I would definitely purchase from them again.
Service inquires are answered very promptly during their business hours, which unfortunately for me are 12 hours ahead in time.
Ken
We are currently updating the manual. In 2 weeks it'll be back from the editor, and new pics will be updated. It will be much easier to understand in English from here on out. P.S. email me at [email protected] if you want a copy of the new manual when it comes out.
Dear All friends,
Here updates some nice pictures of EXLAS1280 150W Laser Cutting Machine:
1.EXLAS 1280 150W for Austrilia clients.
2.Industrial chiller(CW5200),Air compressor and Exhaust fan.
3.Sample 20mm hardwood sharp cutting by 150w Reci tube.
4.Sample Stamp engraving by 150w Reci tube.
More details pls inquire us by
[email protected]
Regards/Mike
CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Machinery LLC
Sorry for the delay on the manual, when it came back from the editor I saw the need for a lot more information to be in the manual, I'm in the process of adding more to it.
How does your PID settings look… I would speculate your stepper motors are oscillating at rest a fraction of a degree?
Hello Cinematic2 we bought XYZ 1325 woodworking ploter with HSD spindle and we are fully satisfied.
Jeśli chcesz zobaczyć maszynę to pracuje koło Otwocka w firmie STX
Dear ALL friends there,
Wish you and your family have a warm"Thanksgiving Day"
All best wishes from
XYZ Machinery~:wave:
Dear All,
Please kindly check NEW Developments about EXLAS LASER on YouTube:
EXLAS X4i ALL-IN-ONE Model Laser Engraving Machine!
[ame=http://www.youtube.com/watch?v=vXEsotIHWl4]exlas x4i laser ALL IN ONE model - YouTube[/ame]
EXLAS X4i Auto focus Functions!
[ame=http://www.youtube.com/watch?v=6TU2PQuz9Vo]autofocus exlas x4i laser cutter Further more contact mike at xyz-tech dot com - YouTube[/ame]
Further more pls inquire us:[email protected]
Dear Slawomir,\
This is Mike,hope all is fine with you and your family!
How is your machine working? any help I can do, just feel free to let me know, recently we also improved our X3 lasers,
and we also started selling new X4 series and X4 series EXLAS laser 6 month ago. if you want I can send you some pictures later.
Thanks in advance!!
With best regards....Mike
Hello,
Could I get some pricing for the exlas HP 6050 please?
Thanks,
Mark