Can I program an open shape by selecting one entity at a time.
The small instruction manual teaches me to choose the entire shape
with a single click. This works , but I really need to have the ability
to choose just a partial area of my shape for a creative
toolpath.
Thread: BobWire v22
Results 1 to 4 of 4
-
11-14-2009, 09:08 PM #1
Registered
- Join Date
- Sep 2004
- Posts
- 23
BobWire v22
-
11-14-2009, 09:29 PM #2
Ghost
- Join Date
- Dec 2008
- Posts
- 4548
Hi Weddelton,
I think this is the 2x open feature. But I'm just getting into it so I dont know how much help I can be. If you want to dig in, You can post a model and I can look with you, but I may need to ask a bunch of questions as to how you want the feature setup.
Burr
-
09-30-2011, 07:45 PM #3
Company Representative
- Join Date
- Oct 2006
- Posts
- 173
2 Axis Open
Here is the tutorial on open shapes...
-
05-25-2020, 04:44 PM #4
Registered
- Join Date
- May 2007
- Posts
- 10
Re: BobWire Software
Can anyone send me BobWire V19.3 or More on my email....thanks
[email protected]
Reply With QuoteSimilar Threads
-
Bobwire v23
By Koblenzer in forum BobCad-CamReplies: 12Last Post: 05-25-2020, 04:46 PM -
BobWIRE v19 and DXF/DWG
By KrystoferRobin in forum BobCad-CamReplies: 12Last Post: 05-25-2020, 04:42 PM -
switch from BobWire v16.- to BobWire v19
By WEDDLETON in forum BobCad-CamReplies: 8Last Post: 08-12-2007, 04:37 PM -
Bobwire 16.1
By Klox in forum BobCad-CamReplies: 0Last Post: 04-28-2003, 07:41 PM
Posting Permissions
