Hi all,
I am new to the CNC scene and wanted to know if anyone can explain the different settings on the mirco step drivers.
I am currently using the 1/2 setting as when I use 1/8 it is a lot smoother but lacks torque when the steppers are turning, I can stop them with my hand.
What are the different settings for?
Results 1 to 1 of 1
-
11-17-2009, 11:46 PM #1
Registered
- Join Date
- Nov 2009
- Posts
- 1
Stepper driver settings 1/8 vs 1/2
Reply With QuoteSimilar Threads
-
Power Supply for 4 Stepper Driver 32-65VDC and 4 Stepper Motor 65V 2.3A
By guy2b1 in forum DIY CNC Router Table MachinesReplies: 16Last Post: 03-08-2011, 12:50 PM -
Thoughts on Servo driver accell settings with Mach2
By Alaska Bob in forum Mach Software (ArtSoft software)Replies: 4Last Post: 06-26-2009, 04:05 AM -
4030 Kellinger driver settings
By Paul R in forum Automation Technology ProductsReplies: 1Last Post: 09-10-2008, 06:37 PM -
STEPPER DRIVER FAQ {Stepper/driver amp per phase match.
By huios in forum Stepper Motors / DrivesReplies: 0Last Post: 08-27-2006, 02:43 PM -
Need a little help with Current settings on driver...
By giblets in forum Stepper Motors / DrivesReplies: 1Last Post: 08-24-2006, 03:19 AM
Posting Permissions
