[Kung fu panda]

hi everyone

the pictures is our new products use in mini-machine,controller 2200W 3000RPM、3500RPM、5000RPM、10000RPM （Speed can be made according to the customer's requirements）

Welcome to see and give me some suggestion

Main function:
◆ Start, Stop, accelerate or decelerating, forward and reverse function
◆ A LCD displays real-time speed, the current state, protection
◆ A flow, over-voltage, overload, voltage protection function
◆ Motor temperature detection
◆ 0-10V analog speed control◆ Provide the user interface should choose function. Panel
◆Should provide 485 interface and TTL interface, which can be conveniently and communication
◆With a sudden stop machine, electric switch, protective mask open doors limit protection
◆Speed 400~6000rpm
◆Drivers can access AC110V/220V two kinds of voltage, in the same drive can be switched

www.sangmutan.com
[email protected]

[mivuna]

I accept with Main function:
◆ Start, Stop, accelerate or decelerating, forward and reverse function
◆ A LCD displays real-time speed, the current state, protection
◆ A flow, over-voltage, overload, voltage protection function
◆ Motor temperature detection
◆ 0-10V analog speed control◆ Provide the user interface should choose function. Panel
◆Should provide 485 interface and TTL interface, which can be conveniently and communication
◆With a sudden stop machine, electric switch, protective mask open doors limit protection
◆Speed 400~6000rpm
__________________
Simulateur de credit simulation pret immobilier | Simulateur credit simulation de pret immobilier | Simulateur de credit immo

[Kung fu panda]

1100W 3500rpm AC220/110V
1100W 6000rpm AC220/110V
1500W 3000~6000rpm AC220/110V
2200W 3000~6000rpm AC220/110V

www.sangmutan.com
[email protected]

[Kung fu panda]

I accept with Main function:
◆ Start, Stop, accelerate or decelerating, forward and reverse function
◆ A LCD displays real-time speed, the current state, protection
◆ A flow, over-voltage, overload, voltage protection function
◆ Motor temperature detection
◆ 0-10V analog speed control◆ Provide the user interface should choose function. Panel
◆Should provide 485 interface and TTL interface, which can be conveniently and communication
◆With a sudden stop machine, electric switch, protective mask open doors limit protection
◆Speed 400~6000rpm
__________________
Simulateur de credit simulation pret immobilier | Simulateur credit simulation de pret immobilier | Simulateur de credit immo

hi
This is some pictures about our motor and controller (1100W ,1500W,2200W),which kind is your needed?

1100W 3500rpm AC220/110V
1100W 6000rpm AC220/110V
1500W 3000~6000rpm AC220/110V
2200W 3000~6000rpm AC220/110V Used in mini-machine ,matching with Mach3

www.sangmutan.com
[email protected]

if you have any question ,please send mail to me---[email protected]

[Kung fu panda]

At present, we are developing 3 ~ 4KW motors and drives,Soon there'll be products


zhang

[email protected]

www.sangmutan.com

[Kung fu panda]

At present, we are developing 3 ~ 4KW motors and drives,Soon there'll be products


zhang

[email protected]

www.sangmutan.com

2200W motor controller use in CNC milling and drilling machine

This control system with perfect function, simple operation, capability of anti-interference, energy saving, low breakdown rate and easy maintenance which can achieve maximum torque and smoothness when at low speed.

[Kung fu panda]

Brushless Motor and controller match with MACH3 Software in CNC-machine

DC300 2200W 6000RPm use as Spindle motor

www.sangmutan.com
[email protected]--------Design and production manufacturers

zhang

[Kung fu panda]

Our BLDC controller will not been Burnt

zhang

www.sangmutan.com

[email protected]

[Kung fu panda]

Splindle motor and controller made by sangmutan

www.sangmutan.com
[email protected]

[CROSSHATCH]

I don't see the prices for the Mini Mill motor/controller combo?

[ee_t]

Did you get my email about: "92ET-BLM-300HA-SMT AC220V/110V 750W 6000RPM,12000RPM"

Is it rated 12krpm at DC 300V and 6krpm at DC 150V?
What is the weight and torque specs of the motor?
Price?

thanks

I don't see the prices for the Mini Mill motor/controller combo?

There are some old prices here to give some idea: http://www.cnczone.com/forums/showth...t=89162&page=2

[gotis]

Hey Panda!

I need a new motor for my mill I have e-mailed you.

[Kung fu panda]

Hey Panda!

I need a new motor for my mill I have e-mailed you.

Dear Jonas
I have receive your e-mail ,and i think 1100W 10000rpm is not suit for you ,if you use in milling machine ,the speed is too high ,i think 6000rpm is enough if you use in cnc-machine,i will send some detail infomation about our motor and controller to you sooner

zhang

[Kung fu panda]

[QUOTE=ee_t;768343]Did you get my email about: "92ET-BLM-300HA-SMT AC220V/110V 750W 6000RPM,12000RPM"

Is it rated 12krpm at DC 300V and 6krpm at DC 150V?
What is the weight and torque specs of the motor?
Price?

thanks


Hi
I am sorroy for delay reply,i was not in the office recently ,i got your E-mail.

Is it rated 12krpm at DC 300V and 6krpm at DC 150V?----NO
the speed will not lower down. the motor is the same(DC300V 750W ) , but our controller can be exchanged between AC110V/220V.
i will send some infomation to your E-mail

Panda

[gotis]

Dear Jonas
I have receive your e-mail ,and i think 1100W 10000rpm is not suit for you ,if you use in milling machine ,the speed is too high ,i think 6000rpm is enough if you use in cnc-machine,i will send some detail infomation about our motor and controller to you sooner

zhang

I´m milling 99% Aluminium and around 2000-5000rpm, thats why I´m looking for high speeds, but if the torque is lower on the 10000 in that range than the 6000 I´ll go with that one.

I´m using a Treadmill motor that´s rated att 2hp and power is enough but the brushes burn out too fast.

Please see http://www.cnczone.com/forums/showthread.php?t=63184

[Kung fu panda]

I´m milling 99% Aluminium and around 2000-5000rpm, thats why I´m looking for high speeds, but if the torque is lower on the 10000 in that range than the 6000 I´ll go with that one.

I´m using a Treadmill motor that´s rated att 2hp and power is enough but the brushes burn out too fast.

Please see http://www.cnczone.com/forums/showthread.php?t=63184

Hi
(I´m milling 99% Aluminium and around 2000-5000rpm)Brushless motor 1100W 6000rpm is enough,I am sure
BLDC motor ,the higher efficiency,energy-saving ,higher lifespan,our motor and controller is suit for milling machine ,Use match with Mach3
I have send E-mail to you ,please check

zhang

[gotis]

Sorry no mail recieved, can you please PM instead?

[Kung fu panda]

Sorry no mail recieved, can you please PM instead?

hi Jonas
I just sent the mail to you use my another E_mail([email protected]) ,PLease check

zhang

[email protected]
[email protected]

[CROSSHATCH]

Kung fu Panda, can you pm price for 6000 RPM motor/controller.


Thank you,

-Jason

[ee_t]

Kung fu Panda, can you pm price for 6000 RPM motor/controller.


Thank you,

-Jason

Quote + details that were sent to me. Will remove on request.