584,802 active members*
4,917 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > SOS / help : fanuc 15T system with "OT007 z+ overtravel (Hard) alarm" FORCE sIGNaL
Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2009
    Posts
    2

    SOS / help : fanuc 15T system with "OT007 z+ overtravel (Hard) alarm" FORCE sIGNaL

    Good Day Frieds & Expert.

    appreciate all help & advice. I have problem with fanuc 15T system with "OT007 z+ overtravel (Hard) alarm" and cannot be RESET.

    Did check all wire and overtravel switch working find. Did manually force the switch and check at PCDIagnosis bit did change 1 to 0 (on & off) X39.2 DI.

    It somethin like "internal force signal" which cause this issue. It's related to Parameter seeting?? Which parameter it's & how to resolve this problem.

    DID TRY "caN + P" aLSO NOT WORKING.

    anybody knOW how to internally disable / reset this alarm.

    is there any link to between Parameter 1000, Parameter 1005 & Parameter 1815.

    What is the correct setting for those Parameter?

    I really need urgently support since this Danichi 152 was sleep almost 3month.


    anybody can help much more appreciate.

    thx

  2. #2
    Faulty Z+ Hardware. Over travel switch, wiring or I/O
    ************************************************** *********
    *~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
    ************************************************** *********
    *__________If you feel inclined to pay for the support you receive__________*
    *_______Please give to charity https://www.oxfam.org.au/get-involved/_______*
    ************************************************** *********

  3. #3
    Join Date
    Dec 2008
    Posts
    239

    OT 007 +OVERTRAVEL (HARD)

    DEAR FRIEND ,
    PLEASE CHECK THE LIMIT SWITCH OF THE OTHER END [OT 007 +OVERTRAVEL (HARD) THE STROKE LIMIT SWITCH LOCATED AT THE POSITIVE SIDE WAS TURNED ON].I MEAN + SIDE OF AXIS, Also cable and 24 v supply on other side Limit sw.
    HOPE YOU CAN RUN THE MACHINE NOW.
    REGARDS
    PRABHAT MISHRA
    [email protected]

  4. #4
    Join Date
    Dec 2003
    Posts
    24216
    Quote Originally Posted by yours_prabhat View Post
    HOPE YOU CAN RUN THE MACHINE NOW.
    PRABHAT MISHRA
    Yeah, hopefully after 2 years!!.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  5. #5
    Join Date
    Dec 2008
    Posts
    239
    Al the man,
    I posted this message for update review not for JlpD so please do not mind as you are so intelligent so better to talk in a technical way.
    Regards and honor to your presence and interactivity
    Prabhat

  6. #6
    Be aware of this guy, he stole US$120.00 and never delivered

Similar Threads

  1. Replies: 2
    Last Post: 09-10-2018, 09:21 PM
  2. Fanuc system 9 loading "hang"
    By waterfall in forum Fanuc
    Replies: 19
    Last Post: 07-26-2017, 02:03 PM
  3. Need CNC machine to cut .01" 302 full hard SS sheets (6" x 20")
    By Lowe in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 03-23-2009, 06:58 PM
  4. Fanuc O-MC Alarm 405 "Z axis wrong (ZRN)"
    By JSaindon in forum Fanuc
    Replies: 2
    Last Post: 09-19-2007, 04:22 PM
  5. Fanuc 18t Turret alarm "1110"
    By senna95 in forum Fanuc
    Replies: 0
    Last Post: 10-18-2006, 05:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •