496,262 active members
6,840 visitors online
Register for free
Login
496,262 active members
Results 1 to 12 of 12
  1. #1
    Registered
    Join Date
    Dec 2009
    Posts
    3

    EMCO PC Turn 50 Lathe

    Hi Everyone, this is my first post on this forum forgive me if this question is in the wrong section

    I have a very good condition EMCO PC Turn 50 Lathe with operating PC, tablet etc that I am thinking of selling to fund a CNC Mill having just purchased a manual Lathe.

    The EMCO was given to me as an upgrade had been purchased at the college where I work, my question is how much should I be asking for when I come to sell it as I have no idea at all about its worth?

    Many thanks, Ken

  2. #2
    Registered
    Join Date
    Dec 2009
    Posts
    3
    Do you think it would be unrealistic of me to ask for around $480 / £300? seems to be a lot of kit for that sort of money but I am clueless as to what its worth

    Thanks, Ken

  3. #3
    Registered
    Join Date
    Mar 2004
    Posts
    1243
    Put it in Ebay with a start price of €1 and ship to whole world. Then it will be visible on the whole Ebay system. You will get a fair price (likely far more than the €320 you are talking about.
    Regards,
    Mark

  4. #4
    Registered
    Join Date
    Feb 2008
    Posts
    10

    I am interested

    Please contact in regards to this kit. I am interested.

    Thank you.

    John.

  5. #5
    Registered
    Join Date
    Dec 2009
    Posts
    3
    Hi Sorry John sold it just last week, Ken

  6. #6
    Registered
    Join Date
    Jan 2010
    Posts
    0

    machines

    I have just bought these two machines in imaculate unused condition complete with pc's however the user manuals are missing and I have no idea how to work them. They are fitted with EOT Cranes control panels but also came with fanuc panels. I would like to use them as they are so can anyone help? please.

  7. #7
    Registered
    Join Date
    Feb 2008
    Posts
    10
    Hello Aaditya1,

    Tell me what do you need specifically and I might be able to help. I also have the manual for the EMCO Fanuc series O-TC if you are interested.

    Regards,

    John.

  8. #8
    Registered
    Join Date
    Apr 2010
    Posts
    0
    kj

  9. #9
    Registered
    Join Date
    Feb 2012
    Posts
    0
    hello friends. i bougth an used emco pc turn 50, i have a compatible computer, but the installation disc are broken, anybony can help me to find the correct software to make work my turn... thaks ...

  10. #10
    Registered
    Join Date
    Nov 2006
    Posts
    9

    Re: EMCO PC Turn 50 Lathe

    Hi.

    I have to write here about EMCO PC TURN 50 lathe a have.

    I have write to emco emails and send web baser reguests. But there is no response - none.

    First i try to get this unit operational again, since it has lost pc and io-card somehow. As they seems to do every case

    Dealer has change since 1995. In Finland there is no one who has repair these machines available anymore. Current dealer sell only model 60 and price is something 10000eur+. It is huge amount for lathe that can be used only for aluminium. So our scholl want real lathe to replace, so i get this unit for free. Later on i found io-card from ebay, but it has no connection. I was again contact to emco - same result than before, no one reply.

    Emco was option when we buy new lathe, but not for real since there is no support when need. We get other manufacturer and now there is 50000eur lathe comming end of month

    However, this small emco is useless now. Any help to get pc cable schematics? I have lathe and fanuc board, floppydisc where program installs, w98 pc with one ISA slot - there is that io-card now. Emco software works ok but lathe does not go reference or do anything.

  11. #11
    Registered
    Join Date
    Feb 2018
    Posts
    1

    Re: EMCO PC Turn 50 Lathe

    Quote Originally Posted by AK47 View Post
    Hi.

    I have to write here about EMCO PC TURN 50 lathe a have.

    However, this small emco is useless now. Any help to get pc cable schematics? I have lathe and fanuc board, floppydisc where program installs, w98 pc with one ISA slot - there is that io-card now. Emco software works ok but lathe does not go reference or do anything.
    Do you still have these problems? We just got one running here in Finland and perhaps can help you.

  12. #12
    Junior Member
    Join Date
    Feb 2019
    Posts
    1
    John, I would like to get a copy of the manuals for the Fanuc 0. Also do you know where I can get a copy of wincam. I have Winn and configure.

Similar Threads

  1. emco turn 120p with emco tronic ti control
    By rcjacob in forum Vertical Mill, Lathe Project Log
    Replies: 0
    Last Post: 03-26-2014, 05:01 PM
  2. EMCO Turn 50 Lathe RS485 PC Board Device driver
    By mazda28 in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 6
    Last Post: 05-14-2013, 01:41 PM
  3. Emco PC Turn 50 lathe, no power? Please help.
    By alping45 in forum Benchtop Machines
    Replies: 4
    Last Post: 02-02-2012, 10:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •